Industrial Serial to Fiber Converter [RS-232, RS-485 or RS-422] 2 Duplex Fiber Port FCRID-100-2DT Series

General Description

The FCRID-100-2DT Series are Industrial Grade Serial to Fiber converters that come with two optical fiber ports that support the ST connector type interface. As the FCRID-100-2DT Series converters come with two optical fiber ports, network topologies such the star topology is supported. The FCRID-100-2DT Series converters can extend the transmitted distance of the asynchronous RS-232, RS-485 or RS-422 serial signals through the optical fibers. Both multimode and single-mode optical fibers are supported. If the single-mode optical fiber is selected, the transmission distance can be extended by 20km. On the other hand, if the multimode optical fiber is selected, the transmission distance can be extended by up to 2km. The FCRID-100-2DT Series converters are designed to rugged and therefore suitable to be deployed at harsh environments with their higher operating temperature range. 

Features

• Can be DIN Rail mounted 
• Rugged in design and come with IP40 ingress protection rating
• Able to operate in high operating temperature up to 85 degrees Celsius
• Comes with redundant dual power inputs
• Comes with relay output for power or link failure warning
  
  

Application Diagram 

Specifications

Electrical interface

• Speed
  0-115200bps - RS232
  

• Serial Port Connector
  

  RS232 support for RXD, TXD, GND 3-line approach to work
  RS422 support for RX-, RX +, TX-, TX + full-duplex mode
  RS485 support for A, B half-duplex mode
  

• Rate
  (optional 500K, 1M, 5M, 10M) - RS422/485
  
  
• Protection
  RS422/485 with 600W surge protection also has overload protection function
  
  
• Wire Cable Connection
  

  DB9-F - RS232
  DB9-F or Pluggable Screw Terminal - RS485/422

• Wire End Termination
  None
  

Optical Interface

• WaveLength
  1310nm
  
  
• Fiber Type
  Multimode 50/125 um, 62.5/125 um, 100/140um;
  Singlemode 8.3/125 um, 9/125um,10/125um
  
  
• Transmission Distance
  MM 2Km, SM 20Km
  
  
• Fiber Interface Type
  ST
  
  

Relay

• Contact Rating
  DC30V@1A Max.
  
• Fiber link fault and No voltage input alarm
• 5-pin Pluggable Screw Terminal
  
  

Power

• Input Voltage
  24VDC
  
• 5-pin Pluggable Screw Terminal
• Support dual power backup
• Consumption:24VDC@60mA(＜1.5W)

Mechanical

• Dimensions
  136mm×52mm×105mm (H×W×D)
  
  

• Casing
  IP40 protection, Metal case
  
  
• Installation
  35mm DIN-Rail, Wall Mounting.
  
  
• Weight
  800 grams

Environmental

• Operating Temperature 
  -40°C ~ 85°C
  
  
• Storage Temperature
  -40°C ~ 85°C
  
  
• Ambient Relative Humidity
  10 to 95% (non-condensing)