Skip to content
Important notice: Revised GST rate from 8 percent to 9 percent.
Important notice: Revised GST rate from 8 percent to 9 percent.

Industrial Ethernet Media Converter Fast Ethernet 1 x 10/100Base-TX to 1 x 100Base-FX (SFP) Un-managed FCNID-1EN-1ES(VER0)

Original price USD $94.50 - Original price USD $94.50
Original price
USD $94.50 (Excl. GST)
USD $103.00 (Incl. GST)
USD $94.50 - USD $94.50
Current price
USD $94.50 (Excl. GST)
USD $103.00 (Incl. GST)

General Description

The FCNID-1EN-1ES is a Fast Ethernet media converter that meets the industrial-grade requirement and converts the 10/100Base-TX Ethernet signal to the 100Base-FX fiber signal and vice versa. It comes with an RJ45 port for the Ethernet connection and an SFP slot for the fiber connection. It can convert and extend the transmission distance of 100m of a typical Ethernet network to that of the 155Mbps SFP transceiver selected. The FCNID-1EN-1ES industrial Fast Ethernet media converter can operate in a broad temperature range from -40 degrees Celsius to 85 degrees Celsius. This makes it suitable to be deployed in a harsh industrial environment. It also complies fully with the industry IEEE802.1Q standard for virtual local-area networks (VLANs) which requires longer data packets to be sent on the network.


· Auto MDI/MDI-X function
· Half/Full duplex auto-negotiation
· Support link-fault-pass-through function to monitor broken links
· Support store-and-forward /cut-through working mode
· Support jumbo frame rate of 9kbytes
· Come with a resettable fuse to prevent current overload
· Come with IP-40 rating protection
· Wide redundant power design range from 12 to 56VDC
· Provide protection against power polarity reverse
· Provide protection against electrical fast transient
· Provide protection against electrostatic discharge (ESD) 

Application Diagram 

Application diagram for industrial Ethernet media converter FCNID-1EN-1ES

Standard Compliances 

IEC 61000-4-2 Level 4 (8K/15K)
         IEC 61000-4-3 Level 3 (10V/m)
         IEC 61000-4-4 Level 3 (1V/2V)
         IEC 61000-4-5 Level 3 (4KV/2KV)
         IEC 61000-4-6 Level 3 (10V/m)
         IEC 61000-4-8 Level 4 (30A/m)
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32 0.5m
Vibration: IEC 60068-2-6
Railway Traffic: EN50121-4


Standards Comply

  • Standards 

    IEEE802.3 10BaseT
    IEEE802.3u 100BaseT(X)
    IEEE802.3x Flow control and back pressure
    IEEE802.1d Spanning Tree


  • Copper Port
    Data Rate: 
    Connector: RJ45

  • F/O Port
    Data Rate: 
    SFP slot 


  • Processing Type: Store and Forward, Cut-through
  • Back Bandwidth: 0.4Gbps
  • MAC Address Size: 2Kbit
  • Packet Buffer Size: 1Mbit
  • Time Delay: <10us
  • Frame: 9Kbytes

    LED Indicators 

    • Indicators 
      PWR1: ON=Power Connected
      PWR2: ON= Power Connected
      FL/A: ON=Fiber Connected; Active=Data Transmitting
      TL/A:ON=Copper Connected; Active= Data Transmitting
      100M: ON=100M Data Rate Transmitting 


    • Dip1 ON + Dip2 ON = Modified Cut-through Mode
    • Dip1 ON + Dip2 Off = Converter Mode
    • Dip1 Off + Dip2 ON = Cut-through
    • Dip1 Off + Dip2 off = Store and forward mode
    • Dip4 ON = LFP Enable
    • Dip4 Off= LFP Disable

    Operating and Environmental 

    • Operating Temperature 
      -40°C ~ 85°C
    • Storage Temperature
      -40°C ~ 95°C
    • Humidity
      5% ~ 95%, non-condensing  

    Dimension and Weight 

    • Dimension (mm)
      115*81*35mm ( HXDxW)
    Dimension diagram for industrial Etherner media converter FCNID-1EN-1ES
    • Weight 
      0.3kg (weight for the device without packaging)


    • Material
      Aluminium Alloy IP40 Rated

    Power Requirement

    • Input Voltage: 12~56 VDC, redundant power inputs
    • Power Consumption: ≤5W
    • Protection: Overload Current; Reverse Polarity 
    • Connector: Terminal Block 


    • can be DIN-Rail mounted