
Industrial Ethernet Media Converter PoE/PoE+ Fast Ethernet 1 x 10/100Base-TX to 1 x 100Base-FX (SFP) Converter Un-managed FCNID-1EP-1ES
General Description
The FCNID-1EP-1ES PoE/PoE+ Fast Ethernet media converter is an industrial grade Fast Ethernet converter. It comes with 1 x 10/100Base-TX slot for the Ethernet interface and 1 x 100Base-FX for the fiber interface. For the fiber interface, it can support the 155Mbps SFP transceiver and the transmission of the fiber signal will depend on the type of SFP selected. The Ethernet interface, on the other hand, can supply up to 30 watts of power, allowing IP devices to be powered up remotely without additional power supply source. As the FCNID-1EP-1ES PoE/PoE+ Fast Ethernet media converter can support a broad temperature range from -40 degrees Celsius to 85 degrees Celsius, it is suitable to be installed at environments that are rugged such as the industrial ones. Being fully compatible with the industry IEEE802.1Q specification standard for virtual local area networks (VLANs), it can be deployed in this network.
Application Diagram

Features
· Auto MDI/MDI-X function
· Auto-negotiation for Half/Full-duplex mode and speed
· Support link-fault-pass-through function to monitor broken links
· Support store-and-forward /cut-through working mode
· Support jumbo frame rate of 9kbytes
· Come with resettable fuse to prevent current overload
· Come with IP-40 rating protection
· Provide protection against power polarity reverse
· Provide protection against electrical fast transient
· Provide protection against electrostatic discharge (ESD)
Standard Compliances
EMC: CE
EMI: FCC Part 15 CLASS A
EMS: IEC 61000-4-2 Level 4 (8K/15K)
IEC 61000-4-3 Level 3 (10V/m)
IEC 61000-4-4 Level 3 (1V/2V)
IEC 61000-4-5 Level 3 (4KV/2KV)
IEC 61000-4-6 Level 3 (10V/m)
IEC 61000-4-8 Level 4 (30A/m)
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32 0.5m
Vibration: IEC 60068-2-6
Railway Traffic: EN50121-4
Specifications
Standards Comply
-
Standards
IEEE802.3 10BaseT
IEEE802.3u 100BaseT(X)
IEEE802.3x Flow control
IEEE802.1d Spanning Tree
IEEE 802.3af/at POE
Interface
- Copper Port
Data Rate: 10/100M
Connector: RJ45 - F/O Port
Data Rate: 155M
Connector: SFP slot
Performance
-
Processing Type: Store and Forward, Cut-through
- Back Bandwidth: 0.4Gbps
- MAC Address Size: 2Kbit
- Packet Buffer Size: 1Mbit
- Time Delay: <10us
- Frame: 9Kbytes
LED Indicators
-
Indicators
PWR1: ON=Power Connected
PWR2: ON= Power Connected
FL/A: ON=Fiber Connected; Active=Data Transmitting
TL/A:ON=Copper Connected; Active= Data Transmitting
100M: ON=100M Data Rate Transmitting
PoE: ON=Power Working; Off=No Power
Dip-switch
- Dip1 ON + Dip2 ON = Modified Cut-through Mode
- Dip1 ON + Dip2 Off = Converter Mode
- Dip1 Off + Dip2 ON = Cut-through
- Dip1 Off + Dip2 off = Store and forward mode
- Dip4 ON = LFP Enable
- Dip4 Off = LFP Disable
Operating and Environmental
-
Operating Temperature
-40°C ~ 85°C
-
Storage Temperature
-40°C ~ 95°C
-
Humidity
5% ~ 95%, non-condensing
Dimension and Weight
-
Dimension (mm)
115*81*35mm ( HXDxW)

-
Weight
0.3kg (weight for the device without packaging)
Housing
-
Material
Aluminium Alloy IP40 Rated
Power Requirement
- Input Voltage: 12~56 VDC, redundant power inputs
- Power Consumption: ≤5W
- Protection: Overload Current; Reverse Polarity
- Connector: Terminal Block
- PoE Budget: 15.4W(PoE), 30W(PoE+)
Installation
- can be DIN-Rail mount or wall-mount (mounting bracket sold separately)