Skip to content
Important notice: Revised GST rate from 8 percent to 9 percent.
Important notice: Revised GST rate from 8 percent to 9 percent.

Industrial Serial to Fiber Converter [RS-232, RS-485 or RS-422] 2 Duplex Fiber Port FCRID-100-2DT Series

Original price USD $566.70 - Original price USD $665.00
Original price
USD $566.70 (Excl. GST)
USD $617.70 (Incl. GST)
USD $566.70 - USD $665.00
Current price
USD $566.70 (Excl. GST)
USD $617.70 (Incl. GST)

General Description

The FCRID-100-2DT Series are Industrial Grade Serial to Fiber converters that come with two optical fiber ports that support the ST connector type interface. With the two optical fiber ports, the FCRID-100-2DT Series converters enable the network topologies such as the star topology. The FCRID-100-2DT Series converters can extend the transmission distance of the asynchronous RS-232, RS-485 or RS-422 serial signals through the optical fibers. Both multimode and single-mode optical fibers are supported. If the single-mode optical fiber is selected, the transmission distance can be extended by 20km. On the other hand, if the multimode optical fiber is selected, the transmission distance can be extended by up to 2km. The FCRID-100-2DT Series converters are designed to be rugged and are suitable to be deployed in harsh environments with their higher operating temperature range. 

Features

  • Can be DIN Rail mounted 
  • Rugged in design and come with an IP40 ingress protection rating
  • Able to operate in high operating temperature up to 85 degrees Celsius
  • Comes with redundant dual power inputs
  • Comes with relay output for power or link failure warning

Application Diagram 

Application diagram for FCRID-100-2DT

Specifications

Electrical interface

  • Speed
    0-115200bps - RS232

  • Serial Port Connector

    RS232 support for RXD, TXD, GND 3-line approach to work
    RS422 support for RX-, RX +, TX-, TX + full-duplex mode
    RS485 support for A, B half-duplex mode

  • Rate
    (optional 500K, 1M, 5M, 10M) - RS422/485

  • Protection
    RS422/485 with 600W surge protection also has overload protection function

  • Wire Cable Connection

    DB9-F - RS232
    DB9-F or Pluggable Screw Terminal - RS485/422

  • Wire End Termination
    None

Optical Interface

  • WaveLength
    1310nm

  • Fiber Type
    Multimode 50/125 um, 62.5/125 um, 100/140um;
    Singlemode 8.3/125 um, 9/125um,10/125um

  • Transmission Distance
    MM 2Km, SM 20Km

  • Fiber Interface Type

    ST

Relay

  • Contact Rating
    DC30V@1A Max.
  • Fiber link fault and No voltage input alarm
  • 5-pin Pluggable Screw Terminal

Power

  • Input Voltage
    24VDC (18~36VDC)
  • 5-pin Pluggable Screw Terminal
  • Support dual power backup
  • Consumption:24VDC@60mA(<1.5W)


Mechanical

  • Dimensions
    136mm×52mm×105mm (H×W×D)
    FCRID-100-2DT Series Serial to Fiber Converter Dimension Diagram
  • Casing
    IP40 protection, Metal case

  • Installation
    35mm DIN-Rail, Wall Mounting.

  • Weight
    800 grams

Environmental

  • Operating Temperature 
    -40°C ~ 85°C

  • Storage Temperature
    -40°C ~ 85°C

  • Ambient Relative Humidity
    10 to 95% (non-condensing)